BGA Rework Station FD-8300
Model: FD-8300
FD-8300 Specifications
Total Power |
6500W |
Top heater |
1200W |
Bottom heater |
2nd heater 1200W, 3rd IR heater 3900W |
Temperature Zones |
Three Zones |
CCD color optical visual system |
Support, high definition adjustable CCD color lens system |
Voltage |
AC220V±10%, 50/60Hz |
Positioning |
V-groove, PCB support can be adjusted in any direction with
external universal fixture |
Temperature control |
K Sensor Closed loop
heating independently |
Temp accuracy |
±2℃ |
Temperature control Settings |
8 levels of variable(up/down) and constant temperature controls
Massive storage of temperature curves |
PCB size |
Max 500×400 mm Min 22×22 mm |
BGA chip |
2×2-80×80mm |
Minimum chip spacing |
0.15mm |
External Temperature Sensor |
1-5pcs (optional) |
vacuum system |
Support, Built-in vacuum |
Touch screen |
7.0 inch, HD Resolution, Panel Visa touch screen |
Workbench fine-tuning |
Front and rear:±15mm,Left and right:±15mm |
Camera magnification |
10x-100x |
Placement Accuracy |
±0.01MM |
Electrical materials |
Taiwan touch screen + PLC + heating plate(Germany)+high precision
intelligent temperature control module |
Dimensions |
L800×W900×H950 mm |
Net weight |
93kg |
FD-8300 Main Functions
1. Embedded with industrial PC and Windows OS, high definition touch screen interface, PLC control and
start-up password for protection and modification. It can display 4-6 temperature profiles simultaneously and store multiple sets of user data with instant profile analysis function. Real-time settings and actual temperature profile display can be used to analyzed and correct parameters if necessary.
2. To ensure the quality of heating and the accuracy of placement, the upper heating head and placement head used
independent heating control and linear slide so that all three axis X, Y and Z can be micro-tuned or quickly positioned. Once mounted, only upper heating head is required to move, lower PCB board will remain
stationary. This ensures the accuracy of placement and the quality of solder joints.
3. The machine uses independent temperature controller for upper hot-air heater, low hot-air heater and bottom IR heater. Heating time, temperature and profile are controlled by the touch
screen display.
4. It uses precise K-type close circuit control and automatic temperature adjustment system, with PLC and temperature
module to enable precision temperature control, , of ±2 deg C. External temperature sensor enables
temperature monitoring and accurate analysis of real time temperature profile.
5. V-groove PCB support for rapid, convenience and accurate positioning that fits for all kinds of PCB board.
6. Flexible and convenient removable fixture on the PCB board which protects and prevent damage to PCB. It can
also adapt to rework various BGA packages.
7. Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement.
8. Use high definition adjustable CCD colour lens system.
9. Features: 2 color separation, magnification, micro adjustment, auto focus, auto correction and
auto colour differentiation and light level adjustment system, adjusting picture clarity manually or
automatically.
10. CE certification, with emergency switch and automatic power-off protection device when emergency happens.
11. X, Y and R axis are adjustable by micrometer with accuracy of up to ± 0.01MM, and with high-definition display, can eliminate human operation errors.
12. 8 level up (down) + 8 level constant temperature control, large storage space for temperature profiles, can
operate curve analysis, setting and correction on touch screen.
13. Including Voice "early warning" function. 5-10 seconds before the completion of uninstalling or welding, voice reminder / warning to get the
workers prepared. After uninstalling or welding, high capacity horizontal airflow fan manually
or automatically cools down PCB to prevent PCB deformation and ensure quality of welding.
14. Built-in vacuum can do 60 ° rotation, micrometer mounting nozzle is micro-adjustable, no compressed-air is required.