BGA Rework Station FD-6900
Model: FD-6900
FD-6900 Specifications
|
Total Power |
4800W |
|
Top heater |
800W |
|
Bottom heater |
2nd heater 1200W, 3rd IR heater 2700W |
|
Temperature Zones |
Three Zones |
|
Voltage |
AC220V±10%, 50/60Hz |
|
Positioning |
V-groove, PCB support can be adjusted in any direction with
external universal fixture |
|
Temperature control |
K Sensor Closed loop
heating independently |
|
Temp accuracy |
±2℃ |
|
Temperature control Settings |
6-8 levels of variable(up/down) and constant temperature controls
Massive storage of temperature curves |
|
PCB size |
Max 500×400 mm Min 22×22 mm |
|
BGA chip |
2×2-80×80mm |
|
Minimum chip spacing |
0.15mm |
|
External Temperature Sensor |
1pcs (optional) |
|
vacuum system |
Support, internal vacuum pump and external vacuum pen |
|
Touch screen |
7.0 inch, HD Resolution, Panel Visa touch screen |
|
Electrical materials |
Taiwan touch screen + PLC + heating plate(Germany)+high precision
intelligent temperature control module |
|
Dimensions |
L800×W900×H950 mm |
|
Net weight |
45kg |
FD-6900 Main Functions
1. Embedded Industrial PC, high definition touch screen interface, PLC control, and instant profile analysis
function. Real-time settings and actual temperature profile display can be used to analyzed and correct parameters if necessary.
2. It uses precise K-type close circuit control and automatic temperature adjustment system, with PLC and
temperature module to enable
precision temperature control of ±2 deg C. External temperature sensor enables temperature
monitoring and accurate analysis
of real time temperature profile.
3. V-groove PCB supports for rapid, convenience and accurate positioning that fits for all kinds
of PCB board.
4. Flexible and convenient removable fixture on the PCB board which protects and prevent damage to PCB.
It can also adapt to rework various
BGA packages.
5. Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement;
6. Three temperature areas can independently heat and are multiple controllable and adjustable
to ensure best integration of
different temperature areas. Heating temperature, time, angle, cooling and vacuuming can
all be set on the interface.
7. There are 6-8 levels of variable and constant temperature controls. Massive storage of temperature
curves which are Instant accessible
according to different BGA. Curve analysis, setting and adjustment are all accessible via
touch screen. Three heating areas
adopt independent PID calculation to control heating process to enable more accurate &, lt;, /SPAN>
a, , , , nd precise temperature control.
8. It uses high powered blower to enable fast cooling of PCB board and prevent it from
deformation. There are also internal
vacuum pump and external vacuum pen to assist with fetching the BGA chip.
9. Including Voice "early warning" function. 5-10 seconds before the completion of uninstalling or welding, , voice reminder / warning to get the workers prepared. Cooling system will start after
vertical wind stopped heating. When the
temperature drops to room temperature, the cooling process will stop, so that the
machine will not age after heated up.
10. CE certification, with emergency switch and automatic power-off protection device when emergency happens.
