BGA Rework Station FD-6800
Model: FD-6800
FD-6800 Specifications
|
Total Power |
4800W |
|
Top heater |
800W |
|
Bottom heater |
2nd heater 1200W, 3rd IR heater 2700W |
|
Temperature Zones |
Three Zones |
|
Voltage |
AC220V±10%, 50/60Hz |
|
Positioning |
V-groove, PCB support can be adjusted in any direction with
external universal fixture |
|
Temperature control |
K Sensor Closed loop
heating independently |
|
Temp accuracy |
±2℃ |
|
Temperature control Settings |
6-8 levels of variable
(up/down) and constant temperature controls Massive storage of temperature curves |
|
PCB size |
Max 450mm×350mm Min 22×22 mm |
|
BGA chip |
2×2-80×80mm |
|
Minimum chip spacing |
0.15mm |
|
External Temperature Sensor |
1pcs (optional) |
|
vacuum system |
Support, internal vacuum pump and external vacuum pen |
|
PC Connect |
built-in VGA port to be connected to a computer |
|
Electrical materials |
PLC + heating plate(Germany)+high precision intelligent
temperature control module |
|
Dimensions |
L520×W600×H650 mm |
|
Net weight |
43kg |
FD-6800 Main Functions:
1. Embedded high accuracy meter controls, has instant data analysis function, real-time display setting and actual measurement data, and be able to analyze and correct the data.
2. It uses precise Ktype close circuit control and automatic temperature adjustment system, with
temperature module to
enable precision temperature control of ±2 deg C. External temperature sensor enables
temperature monitoring and
accurate analysis of real time temperature profile.
3. Vgroove PCB support for rapid, convenience and accurate positioning that fits for all kinds
of PCB board.
4. Flexible and convenient removable fixture on the PCB board which protects and prevent
damage to PCB. It can also
adapt to rework various BGA packages.
5. Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and
replacement;
6. Three temperature areas can independently heat and are multiple controllable and adjustable
to ensure best integration
of different temperature areas. Heating temperature, time, angle, cooling and vacuuming can
all be set on the interface.
7. There are 6-8 levels of variable and constant temperature controls, can save 10 segment temperature setting,
adjust kinds of BGA
rework station.
8. It uses high powered blower to enable fast cooling of PCB board and prevent it from
deformation. There are also
internal vacuum pump and external vacuum pen to assist with fetching the BGA chip.
9. After heating, cooling system automatically starts, when temperature drop to normal,
automatically stop cooling,
ensure not burn-in the machine.
10. CE certification, with emergency switch and automatic power-off protection device when emergency happens.
