BGA Rework Station FD-5600
Model: FD-5600
FD-5600 Specifications
|
Total Power |
3200W |
|
Top heater |
800W |
|
Bottom heater |
IR 2400W |
|
Temperature Zones |
Two Zones |
|
Voltage |
AC220V±10%, 50/60Hz |
|
Positioning |
V-groove, PCB support can be adjusted in any direction with
external universal fixture |
|
Temperature control |
K Sensor Closed loop
heating independently |
|
Temp accuracy |
±2℃ |
|
Temperature control Settings |
8 levels of variable(up/down) and constant temperature controls
10 groups storage of temperature curves |
|
PCB size |
Max 400mm×350mm Min 22×22 mm |
|
BGA chip |
2×2-80×80mm |
|
Minimum chip spacing |
0.15mm |
|
External Temperature Sensor |
1pcs (optional) |
|
vacuum system |
Support, internal vacuum pump and external vacuum pen |
|
PC Connect |
built-in VGA port to be connected to a computer |
|
Dimensions |
L470×W490×H600 mm |
|
Net weight |
32kg |
FD-5600 Main Functions
1. This machine uses dual temperature control with wind heating for the upper part and IR heating
for the lower part. Both
parts have its individual temperature control with high precision temperature control panel which
has 8 levels of temperature
adjustments and can save up to 10 sets of temperature settings simultaneously. External
temperature sensor enables timely
control, adjust and managing every temperature data.
2. It uses precise Ktype close circuit control and automatic temperature adjustment system, with
temperature module to enable
precision temperature control of ±2 deg C. External temperature sensor enables temperature
monitoring and accurate analysis
of real time temperature profile.
3. Vgroove PCB support for rapid, convenience and accurate positioning that fits for all kinds
of PCB board
4. Flexible and convenient removable fixture on the PCB board which protects and prevent damage to PCB. It
can also adapt to rework various
BGA packages.
5. Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement.
6. 8 segment temperature up (down) +8 segment constant temperature control
7. Before the completion of uninstalling or welding, voice reminder / warning to get the workers
prepared. After uninstalling or welding
after uninstalling or welding, high capacity horizontal airflow fan manually or automatically cools
down PCB to prevent PCB
deformation and ensure quality of welding.
8. CE certification, with emergency switch and automatic power off protection device when emergency happens.
