BGA Rework Station FD-5200
Model: FD-5200
FD-5200 Specifications
Total Power |
3200W |
Top heater |
800W |
Bottom heater |
IR 2400W |
Temperature Zones |
Two Zones |
LED Display |
LED text display control, digital Display |
Voltage |
AC220V±10%, 50/60Hz |
Positioning |
V-groove, PCB support can be adjusted in any direction with
external universal fixture |
Temperature control |
K Sensor Closed loop
heating independently |
Temp accuracy |
±2℃ |
Temperature control Settings |
6 levels of variable(up/down) and constant temperature controls
10 groups storage of temperature curves |
PCB size |
Max 400mm×350mm Min 22×22 mm |
BGA chip |
2×2-80×80 |
Minimum chip spacing |
0.15mm |
External Temperature Sensor |
1pcs (optional) |
vacuum system |
Support, internal vacuum pump and external vacuum pen |
Dimensions |
L390×W500×H580 mm |
Net weight |
40kg |
FD-5200 Main Functions
1. Uses LED monitor control – all the data adjustments, control and display
are digitally presented in a clear and convenient fashion.
2. This machine uses dual temperature control with wind heating for the upper part and IR heating for the lower part. Heating time, temperature and all relevant data are all displayed
on the monitor.
3. It uses precise K-type close circuit control and automatic temperature adjustment system, with temperature
module to enable precision temperature control of ±2 deg C. External temperature sensor
enables temperature monitoring and accurate analysis of real time temperature profile.
4. V-groove PCB support for rapid, convenience and accurate positioning
that fits for all kinds of PCB board.
5. Flexible and convenient removable fixture on the PCB board which
protects and prevent damage to PCB. It can also adapt to rework various
BGA packages.
6. Various sizes of BGA nozzles, which can be adjusted 360 degree for easy installation and replacement;
7. 6 segment temperature up (down)+6 segment constant temperature control
8. Before the completion of uninstalling or welding, voice reminder /
warning to get the workers prepared. After uninstalling or welding After
uninstalling or welding, high capacity horizontal airflow fan manually
or automatically cools down PCB to prevent PCB deformation and ensure
quality of welding.
9. CE certification, with emergency switch and automatic power-off
protection device when emergency happens.